9. SETTING THE ARC WELDER
9.5 RECOMMENDATIONS FOR USE
Only use an extension lead when absolutely necessary and providing it has an equal or larger
section to the power cable and is fitted with a grounding conductor.
Do not block the welder air intakes. Do not store the welder in containers or on shelving that
does not guarantee suitable ventilation.
Do not use the welder in any environment in the presence of gas, vapours, conductive
powders (e.g. iron shavings), brackish air, caustic fumes or other agents that could damage
the metal parts and electrical insulation.
NOTE:
The electric parts of the welder have been treated with protective resins. When used
for the first time, smoke may be noticed; this is caused by the resin drying out completely.
The smoke should only last for a few minutes.
17
