Draper 63129, Инструкция по эксплуатации

Страница: 9 / 12

- 8 -
MAINTENANCE &
PART REPLACEMENT
Regular inspection and cleaning reduces the
necessity for maintenance operations and will keep
your tool in good working condition. The tool
bearings and gears are life-long lubricated. The
motor must be correctly ventilated during tool
operation. For this reason avoid blocking the air inlets
with hands. After use disconnect the tool from the
power supply and clean carefully, use compressed air
through ventilation slots.
DISPOSAL
At the end of the machine’s working life, or when it
can no longer be repaired, ensure that it is disposed
of according to the standard regulations of the
country in which it is being used, and that the
disposal operation is carried out by specialized
personnel following authorized guidelines.
In all circumstances:
– Do not abandon in the environment;
– Do not dispose of together with household waste;
– Contact your local authority recycling centre
WARNING
Disconnect the plug from the power supply socket
before replacing any parts.
IMPORTANT:
All operations should be performed by an authorized
person.