Draper 63129, Инструкция по эксплуатации

Страница: 8 / 12

- 7 -
OPERATION AND USE
SWITCH
To turn the machine on, press the switch
✴✌
forward until it
locks on. (Fig.4).
To release the lock, push the back half of the switch down,
until it springs backwards, switching off the grinder.
ROUGHING
When performing roughing operations, it is advised to
maintain the disc tilted at an angle of approximately 30° in
relation to the work surface. (Fig.5).
NOTE: Only use grinding discs for this operation.
IMPORTANT
Excessive pressure on the machine does not necessarily
result in higher working speed, on the contrary, it
increases the wear on the disc and can damage the
grinder.
CUTTING
When cutting do not incline the grinder and do not jam the
grinder on the work surface. The cutting edge of the disc
must be in perfect condition (Fig.6). (For hard stone a
diamond-tipped grinding wheel is recommended.)
SIDE HANDLE
For reasons of safety, when working with this type of
electric power tool, the operator must always use the side
handle.
In order to fit the side handle on the grinder, insert it into
one of the threaded seats in the aluminium head and screw
in clockwise until fully tightened.
IMPROPER USE
The functions and use of this tool are those exclusively
indicated in this manual.
Fig.4.
Fig.5.
Fig.6.
✴✌
Fig.7.