8
CARE & CLEANING
Do not wet the detector, immerse it in water or expose to excessive
moisture, as the instrument body is not designed to be totally
waterproof.
Clean the instrument body, probe and cable with a damp cloth or
preferably a ‘wet-wipe’ and dry thoroughly before use or storage.
Store the detector in its carrying case in a clean and dry place when not
in use.
BATTERY REPLACEMENT
Low battery power is indicated by the red diode (light) and a new
battery is required when this appears. It is recommended that a high
performance alkaline battery is used for this instrument or alternatively
a good quality rechargeable battery.
To change the battery:
1.
Unscrew both screws, which fix the battery cover plate on the
rear of the unit.
2.
Remove battery from its compartment and release from
terminals.
3.
Renew battery, fix clasps to correct terminals and replace in
battery compartment.
4.
Replace battery cover plate, and replace two fixing screws.
TECHNICAL DATA
Dimensions:
(L)120mm x (W)75mm x (H)30mm
Net Weight:
250g approximately
Power Source:
Alkaline 9 volt battery (automatic battery failure
signal)
Working Temperature:
From 0
o
C to + 60
o
C
