33
32
INSTALLING THE UNIT
-
STEP SEQUENCE -
Dust Inlet
Dust Inlet
Air Outlet
Air Outlet #1
Air Outlet #2
AIR OUTLET WITH A BOOSTER HEAD
In a parallel configuration, each head, including the main one, requires an independent air outlet. A series
configuration only requires one. However, the TETE200/TETE200E head carries two air outlets.
4) CONNECT THE AIR OUTLET
• Connect the air outlet to the unit, securing it with a
clamp (do not glue).
An air outlet leading outside the
building is mandatory for all Automatik systems.
If your model includes 2 motors, the air outlet is on top
of the unit. If it only includes 1 motor, the air outlet is on
the side of the unit.
Air Outlet
Consult the booster head user’s guide for more information.
Parallel configuration
Series configuration
Steel Muffler
STEEL MUFFLER
• Some units are equipped with a steel
muffler to absorb the noise produced
by more powerful systems.
• Contrary to plastic mufflers, this steel
muffler must be installed on the wall.
You will find the installation method on
the sheet provided with the exhaust.
Back View of the Unit
(Model DV2A310 shown)
5) ADD THE AUDIOPROTEK MUFFLERS
• Instructions on how to assemble the Audioprotek
mufflers are included on a sheet inside the packaging.
* N.B. All models equipped with only one motor include only
one muffler centred on the top of the unit.
6) ASSEMBLE THE DECANTER
* For the decanter option only.
• Screw the metal rod in the centre of the decanter until it
seats the bottom. Place the decanter in the funnel of the unit.
INSTALLING THE UNIT
-
STEP SEQUENCE -
