Dräger Polaris 600 Скачать руководство пользователя страница 51

Страница: 51 / 96

Instructions for use

Polaris 600

Operation

Ambient light mode (Endo light)

When the

Synchronization

function is activated,

the Polaris 600 lights can be individually switched

to the

Ambient light

mode. This deactivates the

Synchronization

function on a light. When a

Polaris 600 light in the light system is in the

Ambient light

mode, the

key on this light is

deactivated. The

Synchronization

function will

not be activated when the

key is pressed.

When all the Polaris 600 lights in the light system

are in the

Ambient light

mode, the

key on the

wall-mounted control panel is also deactivated.

Switching the ambient light mode on

The description of this function applies to both the

light control panel and the wall-mounted control

panel. Only the light control panel is shown in the

illustrations.
The light must be switched on before this function

can be activated, see "Switching the light on and

off" on page 40.



Press the

key (A) for 1.5 seconds.

The light switches to the

Ambient light

mode.

The status LED (B) lights up.

Switching the ambient light mode off



Press the

key (A).

The

Ambient light

mode is deactivated.

The light switches to the

OR light

mode.

The status LED (B) is not lit.

– For further information on the ambient light

mode (Endo light), see "Technical light data" on

page 84.

26681

Содержание Polaris 600

































































































Результаты поиска

Содержание Polaris 600

Отзывы:

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 51 / 96

Результаты поиска

Содержание Polaris 600

Отзывы: