Dräger Polaris 600 Скачать руководство пользователя страница 48

Страница: 48 / 96

Operation

Instructions for use

Polaris 600

Color temperature function

The description of this function applies to both the

light control panel and the wall-mounted control

panel. Only the light control panel is shown in the

illustrations.

The light must be switched on before this function

can be activated, see "Switching the light on and

off" on page 40.

There is an indicator with 3 LEDs for the color

temperature. These LEDs indicate the color

temperature set for the light.

– The color temperature when the light is

switched on is the same as the color

temperature set before the light was switched

off.

Press the

key (A).

The color temperature is increased.

Press the

key (A) again.

The color temperature is increased by a further

step.

The change in color temperature is shown by

the LED indicator (B).

If the highest color temperature has been

reached, pressing the

key (A) again will

reset the color temperature to its lowest value.

– For further information on color temperature,

see "Technical light data" on page 84.

LED indicator

Color temperature
3800 K

4400 K

5000 K

5600 K

26566

Содержание Polaris 600

































































































Результаты поиска

Содержание Polaris 600

Отзывы:

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 48 / 96

Результаты поиска

Содержание Polaris 600

Отзывы: