manualshive.com logo in svg

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 13 / 96

Поделиться
Скачать
Dräger Polaris 600 Скачать руководство пользователя страница 13

Instructions for use

 

Polaris 600  

13

Safety-related information

Direct view of the operating field

Cautious positioning of the arm system

Risk of the light head overheating

Compatibility of displays

Observe the maximum load of the 
display mount

Read and observe the instructions for 
use of the displays

OR server

WARNING

Risk of personal injury

A camera is not intended to be used as the 

sole visualization medium during an 

operation.

Make sure that the OR personnel have a 

direct view of the operating field at all times.

CAUTION

Risk of personal injury and property damage

The stops on the arm system may become 

damaged.

When positioning the swivel arms and the 

attached devices, take care not to use force to 

pull the arm system beyond the stops.

WARNING

Risk of property damage

The light head may overheat during 

operation.

Do not cover the light head completely or 

partially.

WARNING

Risk due to incompatible displays

The displays used in combination with a 

Polaris light system must be approved for 

use in the patient environment according to 

IEC 60601-1.

WARNING

Risk of personal injury and property damage

The specification for the maximum load on 

the display mount must not be exceeded.

 Comply with the maximum load of the 

display mount.

WARNING

Risk of device malfunction

To properly use the light system, read and 

comply with the instructions for use of the 

respective display.

WARNING

Risk of patient injury

The OR servers used must conform to Safety 

Class B of the IEC 62304 standard.

WARNING

Risk of patient injury

The OR severs used must conform to the 

IEC 60601-1:1988 (or later) or IEC 60950-1 

standards.

Содержание Polaris 600

































































































Отзывы:

Нет отзывов