Instruction Manual Dräger MSI EM2 EM200plus-i
9
4. Selection of functions
Selectable functions are:
Switch-off
= Switches off the instrument
Customer administration
= Selection or input of customer data
Visual examination
= Documentation of visual examination
Flue gas analysis
= Select type of flue gas measurement
Pressure tests
= Selection of pressure measurements
4Pa-Test
= Menu “4Pa-test“ (option)
Heating check
= Menu “Heating check“ (option)
CO ambient
= Ambient air CO measurement
Gas pipe checks
= Selection of gas pipe checks
BCI diagnostic
= Start of the reading out of digital burner controllers of
Siemens (Landis & Staefa) and Honeywell (Satronic)
using Dual-BCI-S (option)
Data management
= Menu “data processing”
Info
= Info function
Measurement settings
= Settings for measurement
Device settings
= Settings for instrument
5. Selection or input of customer data
With the PC program „PC200P“ it is possible to compile a list
with customer number, name and customer data and send all
or parts of it to the instrument. If customer data are stored,
you may select one of them or alter them with this function.
If no data are stored for the customer, you may create new
customer data with this function.
With
(SELECT)
the marked customer number will be adopted.
The adopted customer number is effective for all following
measurements until a different customer number is selected or
the instrument is switched off.
With (
lll
) the context menu will be opened.
