© 2014 Draeger Medical, Inc.
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
|
21
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
TO SELECT A DIFFERENT WAVEFORM FOR VIEWING ON THE ICS
(BEDSIDE MONITORS ONLY)
1.
Right-click
with the mouse inside the waveform area of the
patient while on the Mainscreen.
2.
Select
Auto
to maintain the display order selected at the bed-
side.
OR
3.
Select
Manual
to assign up to four waveforms to the waveform
areas. Select the arrow and choose the desired waveform or-
der.
4.
Select the Apply button to confirm the new waveform selec-
tion. The following symbol appears in the header bar of the
Viewport in Manual mode:
TO CHANGE THE COLOR OF THE M300 PATIENT WAVEFORMS &
PARAMETER VALUES AT THE ICS
1.
Open the BedView page by selecting the viewport of the te-
lemetry patient on the ICS Main screen.
2.
Select
Telemetry/Parameters
button on the Bedview menu
bar.
3.
Select the
Layout/Parameters
tab.
4.
Select the
ECG
tab.
5.
Use the arrow to select the desired color. Select
Apply
.
6.
Select
SpO
2
tab.
7.
Use the arrow to select the desired color. Select
Apply
.
Note:
For a bedside monitored patient, this must be completed at
the bedside monitor.
TO INITIATE A MANUAL RECORDING (R50N, if available)
1.
Left-click
the mouse in the waveform area of the patient’s
Main screen viewport to display the Record button symbol
(appears for 5 seconds):
