Dräger Medical JM-103, Руководство по эксплуатации

Страница: 50 / 92

DRAFT 18 May 2005
Page 7 - 2 Jaundice Meter (Model JM-103) User Manual (usr070)
Troubleshooting
WARNING:
Only facility-authorized personnel should troubleshoot the
Jaundice Meter. Troubleshooting by unauthorized personnel
could result in personal injury or equipment damage.
If an abnormality occurs with the Jaundice Meter, perform the
following:
1. Refer to the table below, and take the necessary action given.
2. If the abnormality still appears, set the Power switch to the Off
position, and then return it to the On position.
3. If the abnormality still continues, contact the nearest authorized
service facility, and take the unit out of service .
Troubleshooting
Symptom Possible Cause Action
The display is blank
when the
Power switch
is in the On position.
The batteries are
exhausted. Charge the battery (see
“Charging the Battery”
on page 4-1).
The display suddenly
goes blank during a
measurement. The batteries are
exhausted. Charge the battery (see
“Charging the Battery”
on page 4-1).
The Charger lamp
does not illuminate
when the Jaundice
Meter is placed on the
charger unit.
The charger unit and
the AC adapter are not
plugged into an AC
outlet correctly. Plug the charger unit
and the AC adapter into
an appropriate power
source correctly.
The Jaundice Meter is
not placed in the
charger unit correctly. Place the Jaundice
Meter perpendicular to
the measuring point in
the charger unit.
It is impossible to take
measurements. The Ready lamp is not
illuminated.
Before taking a
measurement, ensure
that the
Ready lamp is
illuminated.
The batteries are
exhausted. Charge the battery (see
“Charging the Battery”
on page 4-1).