background image

 

6

 

 

Only operate your chipper from the operator zone. 

 

Know how to turn your unit off. 

 

Never move your chipper or leave it unattended with the engine running. 

 

Follow engine owner’s manual for engine maintenance and repair. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

YOUR RESPONSIBILITY 

 

  Restrict the use of this power machine to persons who read, understand and 

follow the warnings and instructions in this manual and on the machine. 

 
 

SAVE THESE INSTRUCTIONS               
FOR FUTURE REFERENCE.      

 

 

 

HAZARD:

     

This unit is equipped with an internal combustion 

engine and should not be used on or near any unimproved 
forest-covered, brush-covered or grass-covered land unless the 
engine’s exhaust system is equipped with a spark arrester 
meeting applicable local or state laws (if any).   If a spark 
arrester is used, it should be maintained in effective working 
order by the operator. 

 

 

In the State of California, the above is required by law (Section 4442 of the California Public 
Resources Code).   Other states may have similar laws.   Federal laws apply on federal 
lands.   A spark arrester for the muffler is available through your Briggs & Stratton servicing 
dealer. 
 

 

Содержание 18.0 HP























Отзывы: