DR 18.0 HP, Руководство по эксплуатации и сборке

Страница: 4 / 22

4
WARNING
: The Engine Exhaust from this product contains chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm.
GENERAL OPERATION
•
Read this owner’s manual carefully in its entirety
before attempting to assemble this machine.
Read, understand, and follow all instructions on
the machine before operation. Be completely
familiar with the controls and the proper use of
the machine before operating it. Keep this
manual in a safe place for future and regular
reference and for ordering replacement parts.
•
Your chipper is a powerful tool, not a plaything.
Therefore, exercise extreme caution at all times.
Your unit has been designed to chip. Do not use
it for any other purpose.
•
Never allow children under the age 16 to operate
the unit. Children 16 years or older should only
operate the unit under close parental supervision.
Only responsible individuals who are familiar with
these rules of safe operation should be allowed
to use your unit.
•
Always wear safety glasses or safety goggles,
during operation and while performing an
adjustment or repair, to protect eyes from foreign
objects that may be thrown from the machine.
Be sure your glasses fit properly.
•
Wear sturdy, rough-soled work shoes and close
fitting slacks and shirt. Shirt and slacks that
cover the arms and legs and steel-toed shoes
are recommended. Secure hair above shoulders
and do not wear loose clothes or jewelry that can
be caught in moving parts. Never operate a unit
in bare feet, sandals or sneakers. Wear gloves
when feeding material into the chipper chute. Be
sure your gloves fit properly and do not have
loose cuffs or drawstrings.
•
Do not operate while under the use of alcohol,
drugs, or medication. A clear mind is essential
for safety.
•
Do not allow anyone who is not alert to operate
this machine.
•
The machine should only be operated on a level
surface. Never operate your unit on a slippery,
wet, muddy, or icy surface.
•
Keep the area of operation clear of all persons,
particularly small children and pets. Stop the
engine when they are in the vicinity of the unit.
Keep work area clean and clear of branches or
obstacles which could cause you to stumble or
fall.
•
Never place your hands, feet, or any part of your
body in the chipper chute, discharge or near any
moving part while the engine is running. Keep
clear of the discharge opening at all times. If it
becomes necessary to push material into the
chipper chute, use a small diameter stick, NOT
YOUR HANDS.
•
Keep your face and body back from chipper
chute to avoid accidental bounce back of any
material.
•
Do not attempt to chip material larger than
specified in the manual. Personal injury or
damage to the machine could result.
•
If it is necessary for any reason to unclog the
feed intake or discharge openings or to inspect or
repair the machine where a moving part can
come in contact with your body or clothing, stop
the machine and allow it to cool. Disconnect the
spark plug before attempting to unclog, inspect or
repair.
•
When feeding material into this equipment, be
extremely careful that pieces of metal, rocks, or
other foreign objects are not included. Personal
injury or damage to the machine could result.
•
Do not allow an accumulation of processed
material to build-up in the discharge area as this
will prevent proper discharge and can result in
kick-back from the chipper chute.
•
If the cutting mechanism strikes a foreign object
or if your machine should start making an
unusual noise or vibration, immediately stop the
engine and allow the machine to come to a
complete stop. Disconnect the spark plug wire
and move it away from the spark plug.
Take the following steps:
a. Inspect for damage.
b. Repair or replace any damaged parts.
c. Check for any loose parts and tighten to assure
continued safe operation.
•
Muffler and engine become hot and can cause a
severe burn. Do not touch.
•
Do not allow any part of the engine, especially
around the cooling fans and muffler, to become
clogged with leaves, oil, grease or any other
combustible material.
•
Do not operate engine if air cleaner or cover over
carburetor air-intake is removed, except for
adjustment. Removal of such parts could create
a fire hazard.
•
Keep all other guards and safety devices in place
and operating properly.
•
Do not use the unit with the chipper hopper
removed.
•
Only use accessories approved for this machine
by the manufacturer. Read, understand, and
follow all the instructions provided with the
approved accessory.