background image

CONTACT US AT 

www.DRpower.com

          5

 

Safety with Gasoline - Powered Machines 

Gasoline is a highly flammable liquid.  Gasoline also gives off flammable vapor that can be easily ignited and cause a fire or 
explosion.  Never overlook the hazards of gasoline.  Always follow these precautions:

 

 

Never run the engine in an enclosed area or without proper ventilation as the exhaust from the engine contains carbon 
monoxide, which is an odorless, tasteless, and deadly poisonous gas. 

 

Store all fuel and oil in containers specifically designed and approved for this purpose and keep away from heat and open 
flame, and out of the reach of children. 

 

Replace rubber fuel lines and grommets when worn or damaged and after 5 years of use. 

 

Fill the gasoline tank outdoors with the engine off and allow the engine to cool completely.  Don't handle gasoline if you or 
anyone nearby is smoking, or if you're near anything that could cause it to ignite or explode.  Reinstall the fuel tank Cap and 
fuel container cap securely. 

 

If you spill gasoline, do not attempt to start the engine.  Move the machine away from the area of the spill and avoid creating 
any source of ignition until the gas vapors have dissipated.  Wipe up any spilled fuel to prevent a fire hazard and properly 
dispose of the waste. 

 

Allow the engine to cool completely before storing in any enclosure.  Never store a machine that has gas in the tank, or a fuel 
container, near an open flame or spark such as a water heater, space heater, clothes dryer or furnace. 

 

Never make adjustments or repairs with the engine running. Shut down the engine, disconnect the spark plug wire, keeping it 
away from the spark plug to prevent accidental starting, wait 5 minutes before making adjustments or repairs. 

 

Never check for an ignition spark with the spark plug or spark plug wire(s) removed.  Always use an approved spark tester. 

 

Never tamper with safety devices.  Regularly check their proper operation. 

 

Never change the engine governor settings or modify the engine speed. Modifications will void your warranty. 

 

To reduce fire hazard, keep the engine and muffler area free of debris build-up such as leaves, grass, oil, grease, or any other 
combustible material.  Clean the engine area after each use. 

 

Never operate the engine without the muffler.  Inspect the muffler periodically and replace if necessary.  If the engine is 
equipped with a muffler deflector, inspect it periodically and replace if necessary. 

 

Never cover the machine while the muffler is still hot. 

 

Do not operate the engine with the air cleaner or the carburetor air intake cover removed.  Removal of such parts could create 
a fire hazard.  Do not use flammable solutions to clean the air filter. 

 

The muffler and engine become very hot and can cause a severe burn; do not touch. 

Содержание 13 HP Pro





































Отзывы: