DR 13 HP Pro, Руководство по безопасности и эксплуатации

Страница: 20 / 36

20 TOW BEHIND
DR
®
FIELD and BRUSH MOWER
1.
Attach the Plastic Hose provided to the Quick Release Oil Drain Valve located on the side of the Engines ( Figure 17 ). Turn the
Valve counterclockwise and pull out to drain the oil into a suitable oil receptacle.
2.
The Engine Oil Filter is located on the side of the Engine. Using an Oil Filter Wrench, or grasping the Oil Filter firmly with your
hand, unscrew the Oil Filter counterclockwise from the Engine.
BE SURE THAT THE OLD FILTER GASKET COMES OFF
WITH THE FILTER .
3.
Wipe the mounting base for the Oil Filter with a clean cloth.
4.
Apply a thin coat of clean motor oil to the new Oil Filter Gasket. DO NOT USE GREASE .
5.
Line up the threads carefully to avoid cross threading and screw the new Oil Filter on until the Filter Gasket contacts the base,
and then tighten the Oil Filter 3/4 to 1 turn.
DO NOT OVER TIGHTEN .
6.
Replace the oil by following the instructions on page 10.
7.
Reattach the Spark Plug wire(s).
NOTE:
Be sure to use environmentally safe disposal procedures in the disposing of the used oil.
Removing and Replacing the Blades’ Drive Belt
Tools and Supplies Needed:
•
7/16" and 1/2" Wrench or Socket
•
Flat Screwdriver
•
9/16" Wrench
•
Side Cutters or Scissors
•
Hooked End Pulling Tool - Optional (we suggest a Tent Peg Puller)
•
New Belt – Part Number 221331
Figure 17
Oil Filter
13 HP Briggs
&
Stratton 17 HP Kawasaki
Oil Drain Valve
Oil Filter
Oil Drain
Valve
When performing any adjustment or maintenance, you must first shut off the engine, wait five (5) minutes to allow parts to cool
and disconnect the spark plug wire(s), keeping it away from the spark plug(s).
Use only DR belts on your machine. They have been thoroughly tested and proven for many hours of use.