background image

CONTACT US AT 

www.DRpower.com

          5

 

This is a high-powered machine, with moving parts operating with high energy.  You must operate the machine safely.  Unsafe 
operation can create a number of hazards for you, as well as anyone else in the nearby area.  This machine can crush, grind, cut, 
and sever parts of your body if they enter the inlet or discharge area of your CHIPPER SHREDDER.  Always take the following 
precautions when using this machine: 

 

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people, their property, and 
themselves. 

 

Always wear protective goggles or safety glasses with side shields while using the CHIPPER SHREDDER to protect your eyes 
from possible thrown debris. 

 

Avoid wearing loose clothing or jewelry, which can catch on moving parts or the material fed into the CHIPPER SHREDDER. 

 

We recommend wearing gloves while using the CHIPPER SHREDDER.  Be sure your gloves fit properly and do not have loose 
cuffs or drawstrings. 

 

Wear shoes with non-slip treads when using your CHIPPER SHREDDER.  If you have safety shoes, we recommend wearing 
them.  Do not use the machine while barefoot or wearing open sandals. 

 

Wear long pants while operating the CHIPPER SHREDDER. 

 

Use ear protectors or earplugs rated for at least 20 dba to protect your hearing. 

 

Keep bystanders at least 100 feet away from your work area.  Stop the engine when another person or pet approaches. 

Protecting Yourself and Those Around You 

Safety for Children and Pets 

 

Safety with Gasoline - Powered Machines

Tragic accidents can occur if the operator is not alert to the presence of children and pets.  Children are often attracted to the 
machine and the chipping/shredding activity.  

Never assume that children will remain where you last saw them.  Always follow 

these precautions:

 

 

Keep children and pets at least 100 feet from the working area and ensure they are under the watchful care of a responsible 
adult. 

 

Be alert and turn the machine off if children or pets enter the work area. 

 

Never allow children to operate the CHIPPER SHREDDER.

 

Gasoline is a highly flammable liquid.  Gasoline also gives off flammable vapor that can be easily ignited and cause a fire or 
explosion.  Never overlook the hazards of gasoline.  Always follow these precautions:

 

 

Never run the Engine in an enclosed area or without proper ventilation as the exhaust from the Engine contains carbon 
monoxide, which is an odorless, tasteless, and deadly poisonous gas. 

 

Store all fuel and oil in containers specifically designed and approved for this purpose. Keep away from heat, open flames, 
and out of the reach of children. 

 

Replace rubber Fuel Lines and Grommets when worn or damaged and after 5 years of use. 

 

Fill the Gasoline Tank outdoors with the Engine off and allow the Engine to cool completely first.  Don't handle gasoline if you 
or anyone nearby is smoking or if you're near anything that could cause it to ignite or explode.  Reinstall the Fuel Tank Cap 
and Fuel Container Cap securely. 

 

If you spill gasoline, do not attempt to start the Engine.  Move the machine away from the area of the spill and avoid creating 
any source of ignition until the gas vapors have dissipated.  Wipe up any spilled fuel to prevent a fire hazard and properly 
dispose of the waste. 

Содержание 11.5 Chipper Shredder





































Отзывы: