Quintaflex R96
Ceiling, Wall Model
Dr. Mach
Lamps and Engineering
59250001
Edition 01
21.02.2002 / Bak Page 8/18
2.2 ON/OFF switch
There are no ON/OFF switches on the lamp head.
The customer must provide a
two-pole ON/OFF
switch
.
2.3 Positioning
For positioning use sterilizable handle
1
.
Handle rail
2
is used for adjusting the lights from the
outside.
The cardan bow
3
is used for convenient, fully
cardanic adjustment of the lamp.
In case of low room heights the lamp is delivered with
a central spring arm. The spring arm has only one
joint.
The coupling for the bow of the lamp body is fitted
with a needle bearing. The inner ring
4
of this needle
bearing has already been pushed on the axis of the
lamp bow.
Remark:
The instructions mentioned above refer to
ceiling and wall models.
2.4 Light field adjustment
(merging of light fields)
The lamps Quintaflex R96 are equipped with the
function of light field realignment.
That means, you can merge the separated light fields
to one spot as shown in the figure.
To activate the light field realignment turn sterilizable
handle
1
.
1
1
2
3
4
