manualshive.com logo in svg

DPS Telecom NetGuardian 216, Руководство пользователя, Страница: 33 / 48

Поделиться
Скачать
DPS Telecom NetGuardian 216 Скачать руководство пользователя страница 33

29

Turn-up and Test Mode

6

Fig. 6.1

 The Turn-up and Test Mode screen — production model interface will display only 16 points

Turn-up and Test Mode provides complete information about the configuration and operation of the NetGuardian
216. To go to the Turn-up and Test Mode you may click on the Turn-up and Test Mode icon on the initial prompt,
click on the Turn-up and Test Mode icon on your toolbar menu, or go to the Action menu and select Turn-up and

Test Mode.

The Turn-up and Test Mode window has four tabs: Alarm, Analog, Relays, and Date/Time. When you open the
Turn-up and Test Mode window, T/NG216 automatically selects the Alarm Tab and displays the Alarm Grid and
the Log screen — see section 6.1 (Alarm Tab) for more information.

Check PC Change-of-State Beep to enable audio notification of alarms on your PC.

In any tab, you can exit Turn-up and Test Mode by clicking the Exit button.

Note

: See Section 9 (Reference Information) for display mapping and descriptions.

Содержание NetGuardian 216

















































Отзывы:

Нет отзывов