manualshive.com logo in svg

DPS Telecom NetGuardian 216, Руководство пользователя, Страница: 29 / 48

Поделиться
Скачать
DPS Telecom NetGuardian 216 Скачать руководство пользователя страница 29

25

Editor System Alarms

5.9

Enter descriptions for each alarm in the Editor Mode, System Alarms tab. You can also choose Yes or No to set
SNMP traps (default trap setting is Yes).

Fig. 5.18 

Use System Alarms tab to describe and set alarm traps

Note

: See section 9.1.3 (NetGuardian 216 System Alarms Map) for alarm mapping reference.

To monitor your Internal System Alarms via T/NG216 you must enter a description in the System Alarms tab in
the Editor Mode. To configure your System Alarms do the following:

1. In the Editor Mode click on the System Alarms tab.

2. Type the descriptions of your System Alarms in the Description box — see Figure 5.18.

3. Choose Yes or No to set SNMP traps (default trap setting is Yes).

Note

: In the Alarm Channel Off mode you will be able to view the descriptions of your system alarms, but you

will not be able to send traps.

 Editor Analog Alarms Tab

5.10

Fig. 5.19

 Configure Analog Alarm descriptions and set traps in Analog Alarms tab

Содержание NetGuardian 216

















































Отзывы:

Нет отзывов