DPS Telecom D-PK-NGDLT, Руководство пользователя

Страница: 29 / 86

23
NetGuardian LT G2 Web Browser
8
The NetGuardian LT G2 features a built-in Web
Browser Interface that allows you to manage alarms
and configure the unit through the Internet or your
Intranet. You can quickly set up alarm point
descriptions, view alarm status, issue controls, and
configure paging information, and more using most
commonly used browsers.
NOTE : Max # of users allowed to simultaneously
access the NetGuardian LT G2 via the Web is 1.
Logging on to the NetGuardian LT G2
9
For Web Interface functionality, the unit must first be configured with some basic network information. If this step
has not been done, refer to the section "Quick Start: How to Connect to the NetGuardian LT G2" for instructions
on initial configuration setup.
1. To connect to the NetGuardian LT G2 from your Web browser, enter its IP address in the address bar of your
web browser. It may be helpful to bookmark the logon page to avoid entering this each time.
2. After connecting to the unit's IP address, enter your login information and click OK. NOTE: The factory
default username is " admin " and the password is " dpstelecom ".
3. In the left frame you will see the Operation menu (blue) and Provisioning menu (green) The Monitor menu
links are used to view the current status of alarms. The Edit menu is used to change the unit's configuration
settings. Most of the software configuration will occur in the
Provisioning menu. The following sections
provide detailed information regarding these functions.
Fig. 9.1 Enter your password to enter the NetGuardian LT G2 Web Browser Interface
!
Hot Tip!
The max. # of users allowed to simultaneously access the NetGuardian LT G2 via the Web is 1.