DPS Telecom D-PK-NG432, Руководство пользователя

Страница: 27 / 80

23
changes.
5. Once the IP address and subnet mask of your computer coincide with the unit, you can access
the NetGuardian via a Telnet session or via Web browser by using the unit's default IP address
of
192.168.1.100 .
6. Provision the NetGuardian with the appropriate information, then change your computer's IP
address and subnet mask back to their original settings.
Now you're ready to do the rest of your configuration via LAN. Plug your NetGuardian into your LAN and
see the "Logging On to the NetGuardian " section to continue databasing using the Web Browser.
TTY Interface
8
The TTY interface is the NetGuardian's built-in interface for basic configuration. From the TTY interface, you can:
·
Edit the IPA, subnet, and gateway
·
Set DCP info for T/Mon polling
·
Configure primary port
·
Ping other devices on the network
·
Set unit back to factory defaults
·
Debug and troubleshoot
For more advanced configuration tools, please use the Web Browser Interface.
For Telnet, connect to the IP address at port 2002 to access the configuration menus after initial LAN/WAN setup.
Telnet sessions are established at port 2002, not the standard Telnet port as an added security measure.
If you're using Windows 7, then you'll need to install telnet before you can use the TTY interface. To install telnet,
open up your command line (type "cmd" into the search bar in the
Start Menu ). Select cmd.exe to run the
command line.
From the command line, type in pkgmgr /iu:"TelnetClient" then press enter . When the command prompt
appears again, the installation is complete.
Menu Shortcut Keys
The letters before or enclosed in parentheses () are menu shortcut keys. Press the shortcut key to access that
option. Pressing the ESC key will always bring you back to the previous level. Entries are not case sensitive.