24
8.2.4
Serial Port
The
Edit>Serial Ports
menu allows you to configure your Remote Power Switch's serial port. The
unit's serial port can be configured for reach-through access, so you can interface with a serial device at
your site via LAN.
Configure your serial ports from the Edit>Serial Ports m enu
Port Configuration
Port Type
Select your serial port type. Default value: 232 (Build options 232, 202, 485)
Baud
Change the craft port baud rate
Parity
Set even, odd, or no parity. Default value: no parity.
Stop Bits
Set the number of stop bits. Default value: 1
RTS head
Set the request to send (RTS) head time in milliseconds
RTS tail
Set the request to send (RTS) tail time in milliseconds
Flow Control
Set to hardware if flow control is required. Defaults to None.
Reach Through
Enable Reach
Through
Checking this box enables serial reach-through, allowing you to access a
serial device connected to your Remote Power Switch via LAN
Port
Enter the Port number used for serial reach through interaction
Type
Use the pull-down box to select the connection type, TCP or UDP
Field descriptions for the Serial Port Configuration screen
