8
Main Power Connection
5.1
To connect the NetGuardian to a power supply:
Battery lead left, and Ground right
Grounding Lug left, dual power inputs right
1) Insert a battery
ground
wire into the connector's
right
terminal (Shown above) and battery
lead
into
the
left
terminal and tighten the screws. Insert the connector into the power plug. Attach a grounding
wire to the grounding lug .
2) Ensure the power status LED
is lit up green for correct polarity.
3) Insert the local fuse into the fuse holder.
4) The front panel status LED should flash RED and GREEN to indicate that the unit is operating.
Note: Always use safe power practices when making power connections. Make sure the power wires are
not active before making any power connections
