24
ADAPTOR FOR THE SCORPIO SCR35 AND SCR35PL MODELS
In order to use narrower media on the
Scorpio SCR35PL, apply the adaptor
onto the core holder first, then load
your narrower media.
HOW TO INSTALL PRESSING ROLLER
The pressing roller facilitates the
matrix removal from the die-cut roll.
How to install the roller:
Unscrew the 10 screws on the matrix
remover module.
1
Position the matrix remover roller
onto the matrix remover module and
secure it properly with the 10 screws.
2
HOW TO USED THE O-RING ON THE MATRIX ROLLER
The o-rings of the matrix remover
roller are used to facilitate the removal
of your matrix from the labels.
Place one or more o-rings (depends
on the width of the label) at the center
of the die-cut label.
Then proceeds with the normal loading
of the media. (pag. 12)
