4
OM-POWER PREP UNLIMITED
Repeat the process until both flow guides are in place. Lastly, set the wave guide in
place over the rear rib sets.
The wash sink components are now in place, and the Power Prep is ready for use.
FILLING THE POWER PREP
Fill the sink until the water is approximately 1” above water level probe located at the
rear wall of the wash tank, but no closer than four inches below the top.
WATER LEVEL
PROBE
Press and hold the Green button to start the pump.
START
BUTTON
When the pump is running, the water will become turbulent, and a strong back-to-
front current will be established.
Begin placing product in the Power Prep. Since there are two compartments, you may
be tempted to place a different type of product in each one. DO NOT do so --- you risk
cross-mixing allergens between different types of product.
After the necessary time for removing the ice covering, the product may be removed
by inserting a collection basket. Holding the basket as shown, angle the basket so its
leading edge is aligned with the flow in the sink.
As you swing the basket into position, product will begin flowing into the basket.
Lift the full basket out when ready. Always observe safe lifting procedures.
DEGLAZING AND WASHING TIPS
Be sure to follow safe food handling practices.
Conserve water by planning your product deglazing or washing.
Deglazing example:
• Deglaze cooked items first.
• Deglaze shelled items.
• Deglaze raw items last.
