manualshive.com logo in svg

Dover Triton FT5000, Руководство по подготовке места и установке

"Довер Тритон FT5000 - это инновационный продукт, который обеспечивает высокую эффективность и надежность. Перед установкой необходимо ознакомиться с Руководством по подготовке и установке нашего сайта, где вы можете скачать его бесплатно. Не забудьте загрузить его с {веб-сайта} для успешной установки."

Поделиться
Скачать
background image

3 9

E

XTENDED

 C

ONFIGURATION

The illustration on right shows the
FT5000 extended.  The primary purpose
for this configuration is for  installation
in facilities with exterior walls having a
maximum thickness of 10 inches (254
mm). The dispensing mechanism has a
bill chute extension designed for the
elongated configuration.  A protective
plate is inserted on the underside of the
cabinet sleeve for security and environ-
mental purpose.

The illustration on right shows the
FT5000 “collapsed” or Island
configuration.  The cabinet sleeve is
moved back approximately 5 - 7/16"
inches (137 mm).  This configuration
allows installation in facilities with
exterior walls having a maximum
thickness of  6 - 5/16" inches (160 mm).
The dispensing mechanism has a
shortened bill chute extension due to
the collapsed state of the unit.

I

SLAND

 C

ONFIGURATION

Figure 12. Extended configuration.

Figure 14. Island configuration.

Figure 13. Screw holes for

Island configuration.

**Warning**

Units are shipped as specified con-
figurations and the dispensing mecha-
nism assembled with the required bill
chute extension. Changing configu-
rations require dispenser modifica-
tions and/or additional hardware.

YOU CAN NOT CHANGE
CABINETCONFIGURATIONS
WITHOUT THE REQUIRED
HARDWARE.

S

ITE

 P

REPARATION

/I

NSTALLATION

Содержание Triton FT5000





























































Отзывы:

Нет отзывов

Похожие инструкции для Triton FT5000

TEC TEC FS-3600 Owner'S Manual preview
TEC FS-3600
Бренд: TEC Страницы: 146
Hengstler Tico 731.1 Operating Instructions Manual preview
Tico 731.1
Бренд: Hengstler Страницы: 7
Standard Change-Makers BCX-FRONT Installation Instructions Manual preview
BCX-FRONT
Бренд: Standard Change-Makers Страницы: 12
BEKA BA567E Manual preview
BA567E
Бренд: BEKA Страницы: 31
Nautilus Hyosung MONiMAX7600DA Operator'S Manual preview
MONiMAX7600DA
Бренд: Nautilus Hyosung Страницы: 102
RAPA L-BK User Manual preview
L-BK
Бренд: RAPA Страницы: 17
TEC MA-1190 Owner'S Manual preview
MA-1190
Бренд: TEC Страницы: 98
Colormetrics V1500 User Manual preview
V1500
Бренд: Colormetrics Страницы: 68
IBM SurePOS 300 Installation And Service Manual preview
SurePOS 300
Бренд: IBM Страницы: 60
Regent Control Systems BC-9461 Operating Manual preview
BC-9461
Бренд: Regent Control Systems Страницы: 4
Sharp XE-A40S Service Manual preview
XE-A40S
Бренд: Sharp Страницы: 28
Sharp XE-A40S Quick Start Manual preview
XE-A40S
Бренд: Sharp Страницы: 2
Sam4s ER-180U Series Operation And Programming Manual preview
ER-180U Series
Бренд: Sam4s Страницы: 77
Sam4s SER 7000 Operation Manual preview
SER 7000
Бренд: Sam4s Страницы: 211
Olivetti ECR 8220 Service Manual preview
ECR 8220
Бренд: Olivetti Страницы: 122
Trotec 3510006010 Operating Manual preview
3510006010
Бренд: Trotec Страницы: 13
Eurotech DynaPCN 10 Series Manual preview
DynaPCN 10 Series
Бренд: Eurotech Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды