manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, Руководство пользователя

Поделиться
Скачать
Dover Markem Imaje SmartDate X60 Скачать руководство пользователя страница 203

204

10056272-AA

 

Cleaning the Printhead 

The printhead should be cleaned at regular intervals. These depend on machine use, 
operating environment, and choice of thermal ribbon.

1

Turn off the power to the controller and remove the ribbon cassette. 
Allow the printhead to cool to normal room temperature before proceeding in order to pre-
vent the possibility of thermal shock damage.

2

Use a cotton swab or a soft cloth soaked 
in Isopropanol solvent to remove any 
residue from the printhead. Take care 
not to use excessive amounts of solvent.
 

The print line is located on the bevelled edge 
of the printhead.

Use great care not to damage the printhead during cleaning. UNDER NO 
CIRCUMSTANCES should abrasive materials, or tools such as screwdrivers, 
be used for cleaning the printhead.
Replace the ribbon cassette and check the print quality. If the overall quality 
is poor, or some of the dots are not printing, the printhead may need to be 
adjusted or changed.

Maintenance 

for parts & service call QLC (800) 837-1309

Содержание Markem Imaje SmartDate X60


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды