manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, Руководство пользователя

Поделиться
Скачать
Dover Markem Imaje SmartDate X60 Скачать руководство пользователя страница 163

Printer configuration 

164

10056272-AA

 

Encoder

The Encoder menu allows you configure various settings related to the Continuous 
printer speed encoder.
The following Encoder options can be configured:

Setting

Description

Encoder Type
Range: External Quadrature, Internal 
or External Pulse Train.
Default: External Quadrature

This allows your to set the Encoder type for Continuous printers.

Encoder Direction
Range: Clockwise or Anti-clockwise
Default: Clockwise

This allows you to set the forward direction of a quadrature encoder.

Encoder Resolution
Range: 2.8 to 150.00 pulses/mm
Default: 3.05 pulses/mm

This allows you to set the number of pulses per mm for an External encoder.

Max Film Speed 
Range: 70 mm/s to 600 mm/s
Default: 300 mm/s

This allows you to define the substrate speed for an Internal encoder.

Speed Warnings
Range: Enabled or Disabled
Default: Enabled

This is Continuous printer feature.

This allows you to enable or disable the speed warnings option. 
When enabled this will provide a warning if the substrate is out of the 
acceptable speed range.

Failure Sensitivity
Range: Off, Low, Medium or High
Default: Off

This allows you to configure the sensitivity of the printer to incoming print 
signals when no encoder signal is detected.

Speed Damping
Range: Off, Low, Medium or High
Default: Off

For use on high-speed applications – controls smoothing of the encoder 
signal.

Speed Lag
Range: 3.0% to 20%
Default: 3.0%

For use on high speed applications – controls high-speed “tension control”

for parts & service call QLC (800) 837-1309

Содержание Markem Imaje SmartDate X60


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды