manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, Руководство пользователя

Поделиться
Скачать
Dover Markem Imaje SmartDate X60 Скачать руководство пользователя страница 165

Printer configuration 

166

10056272-AA

 

Ribbon Setup

The Ribbon Setup menu allows you to configure various ribbon specific settings.
This enables the Controller to fine tune printer settings to suit individual ribbon types.
The following Ribbon Setup options can be configured:

Setting

Description

Ribbon Grade
Range: 3100, 3410, 3510, 3810, 
3820, 3910, 4910, 5810, Non 
Markem-Imaje
Default: 3810

This allows user to set the grade of the ribbon being used. 

Ribbon Colour
Range: BK, WE, GD, BE, BN, CN, 
GN, RD, YW.
Default: BK 

This allows user to set the colour of the ribbon being used.
The options will depend upon the grade selected. 
No options with Non Markem-Imaje ribbon.

Ribbon Width
Range: 20mm, 25mm, 30mm, 35mm, 
40mm, 45mm, 50mm, 55mm.
Default: 55mm

This allows user to set the width of the ribbon being used.
The options will depend upon the printhead width selected.

New Ribbon Length
Range: 100 to 900
Default: 900

This option is displayed if Non Markem-Imaje ribbon is selected.
This allows you to set the length of ribbon being used.

New Outside Diameter
Range: 40.0 to 100.0 mm
Default: 98.0 mm

This option is displayed if Non Markem-Imaje ribbon is selected.
This allows you to set the outside diameter of ribbon being used.

Core Outside Diameter
Range: 30.0 to 35.0 mm
Default: 32.0 mm

This option is displayed if Non Markem-Imaje ribbon is selected.
This allows you to set the outside diameter of ribbon core being used.

for parts & service call QLC (800) 837-1309

Содержание Markem Imaje SmartDate X60


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды