manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, Руководство пользователя

Поделиться
Скачать
Dover Markem Imaje SmartDate X60 Скачать руководство пользователя страница 108

109

10056272-AA

 

Materials and Applications

High Speed mode is designed for applications where a small reduction in perceived 
quality is acceptable so the customer may benefit from high running speeds. Primarily 
these applications are for simple Date & Lot type overprinting applications. High Speed 
mode can be used to print picket fence orientated barcodes, but must not be used to 
print Ladder format barcodes.
As for all applications, the customers material type should always be tested, however 
testing has proven SmartDate X60 High Speed mode to work well on various materials 
including: Polypropylene, Polythene, Premium labels and Laminated films. High Speed 
mode also increases the performance of the SmartDate X60 on “difficult to print on 
substrates” and “Harder to adhere ribbons“. High Speed mode will only operate reliably 
with Markem-Imaje-approved grades of Thermal Ribbon.

 

 

High Pack Rate Mode  

 

High Speed Print Mode

Operation

for parts & service call QLC (800) 837-1309

Содержание Markem Imaje SmartDate X60


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды