manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, Руководство пользователя

Поделиться
Скачать
Dover Markem Imaje SmartDate X60 Скачать руководство пользователя страница 136

137

10056272-AA

 

Date Entry Screens

There are three types of “Date Entry” screens that the User Interface has to support:
- Literal Date Entry
- Fixed Format Prompted Date Entry
- Offset Date Entry

 

Literal Date Entry

This screen is used to prompt the setting of a fixed date to be printed. There is no cal-
culation made on this date, it is displayed (Prompted) in the format that it will be printed. 
This means that the fields that make up the date string, can appear in any order, de-
pending on how it was set at the design stage.

Literal Date 1

Select Job

Print Preview 

If required use the Blue + and - buttons to change the date before printing.
Alternatively use the Calendar function to alter the date.

Literal Date 2

Select Job

Print Preview :

Job selection

for parts & service call QLC (800) 837-1309

Содержание Markem Imaje SmartDate X60


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды