Page 8
Hydro Systems Co. 2019
HYD10099044 Rev 1.4
Setup of the EvoClean dispensers:
The EvoClean setup should be followed in the ‘EvoClean Installation and Operation manual’, this gives a more comprehensive
setup of the system. Install the EvoClean units in accordance with the dimensional information given below in relation to
distances from the EvoBoost.
Installation of EvoBoost plumbing:
•
Connect the EvoBoost in accordance with the diagram below, adhering to the dimensions indicated.
•
A serviceable water filter (approx. 105 micron) (not provided) should be used on the incoming mains supply.
•
Each numbered item in next image is referenced from table “contents of packaging”.
5.2 Installation for up to 3x EvoClean dispensers
The following installation suggestions outline the method of connecting the EvoBoost to the mains water supply & up to 3
x EvoClean units.
A range of installation kits can be purchased to assist with a quick, neat & professional installation, that
achieve the 3 options listed below. Details of kits are listed within the manual; please contact your local sales
representative for further information.
•
Please ensure the distances between the EvoClean dispensers and EvoBoost unit are adhered to, in order to maintain
correct operation.
•
Minimum pipe internal diameter should be 8mm. Anything smaller may affect function & wash results.
•
Ensure all plumbing connections are tightened sufficiently / sealed correctly, to ensure there are no leaks.
•
Ensure there are no kinks in the water delivery hoses. This will affect function & wash results and reduce the life of the
pump in the EvoBoost.
•
Ensure all plumbing is connected before switching on the EvoBoost unit
•
Ensure both the EvoBoost & EvoClean units are isolated (power & water) and de-pressurised before servicing or
maintaining either unit.
Setting up the EvoBoost:
•
Position the EvoBoost in the desired location for install.
•
Ensure the strainer washer is fitted to the INLET side of the EvoBoost (as illustrated)
NOTE: STRAINER WASHER MUST BE FITTED IN ORDER FOR THE PRODUCT TO WORK EFFECTIVELY.
1. EVB1561230VB
2. EVB1561115VG
water inlet
•
Ensure the waste pipe elbow is fitted to the OVERFLOW OUTLET on the side of the EvoBoost (as illustrated in the
recommended setup diagrams)
Содержание HYDRO EvoBoost
Страница 1: ...user manual EvoBoost ...
