Dover HYDRO EvoBoost, Руководство пользователя

Страница: 5 / 20

Page 5 Hydro Systems Co. 2019
HYD10099044 Rev 1.4
The EvoBoost is designed to supply laundry dispensers (max. 3 low flow EvoClean’s) with 2.5 bar (35 psi) consistently.
With the EvoBoost installed, chemical delivery will be consistent and extremely accurate, leading to predictable laundry
results. The key features of the unit are as follows:
• The EvoBoost is equipped with a powerful and reliable electric diaphragm pump in either 230VAC or 115 VAC versions
with a flow rate of 6.1 LPM (1.6 GPM).
• The EvoBoost is small and compact and specifically designed for OPL applications. It is designed to sit neatly on the
floor near the chemical containers and has a clean aesthetic.
• The air gap on the water inlet of the EvoBoost provides a physical air break between the incoming potable water
supply and the main water reservoir.
• Although it has been designed for a laundry use case, the EvoBoost is versatile and flexible to be used with any venturi
dispenser
• The EvoBoost pump will run when a valve on the dispenser opens until the pressure reaches 5.5 bar (80 psi), at which
point, the integrated pressure switch turns it off.
2. description
Water tank
Rear cover
Pump
Power cable
3M (10ft) long
Water outlet
Water inlet
Overflow fitting
Part Number Description Inlet Fitting Outlet Fitting Voltage
EVB1561115VG EvoBoost 115v 3/4 GH, Female 3/4 GH, Male 115 VAC
EVB1561230VB EvoBoost 230v 3/4 BSP, Male 3/4 BSP, Male 230 VAC