6
Index Drive Oil Capacities (Approximate)
For indexers mounted in the normal* position. Consult DESTACO for units not listed.
Model No.
US.
Metric
Model No.
U.S.
Metric
(quarts)
(liters)
(quarts)
(liters)
80RDM
Grease filled**
40RGD/S 6
oz. 0.2
601RDM 2
2
50RGD/S
16
oz.
0.5
902RDM 3
3
70RGD/S
20-24
oz.
0.6-0.7
1100RDM 8 8
80RGD/S
30-38
oz.
1-1.1
1305RDM 9 9
110RGD/S
C/F
C/F
1800RDM 36 34
350RGD/S
1
1.4
425RD 2
2
500RGD/S
5
4.7
800RD 5
5
700RGD/S
10
9.5
1301RD 14
13
1801RD 36
34
1100RNG
C/F
C/F
1550RNG
C/F
C/F
250P 1
1
2050RNG
C/F
C/F
387P 2
2
512P 5
5
750E
C/F
C/F
662P 10
10
950E
10
gallons
38
900P 20
19
1150E
25
gallons
95
1200P 48
45
1550E
40
gallons
152
1800P 95
90
2050E
45
gallons
171
2750E
75
gallons
285
401RA (C)
1
1
512RA(CC) 2 2
150RPP 2.5 2.4
662RA(CCM) 6
6
300RPP
4
4
663RAD(DR) 4
4
500RPP
10
9
900RAD(GH) 6
6
900RPP
48 45
* Normal indexer mounting position is output vertical over input on all models except the "Parallel series" (P)
in which normal mounting is output horizontal, even with input. “Output Vertical” refers to the direction of the
center of rotation. For dial-type indexers, this is the position with the dial horizontal.
** “Grease-filled” units are shipped with grease. Grease should only need to be added if the unit is
disassembled for rebuild or repair.
C/F: Consult DESTACO for information
Oil Seal Installation Recommendations
DESTACO recommends that all seals be replaced any time the device is being disassembled
regardless of whether they are damaged or not. Most damage to oil seals occurs at assembly when
recommended seal installation procedures are not followed.
1. Check dimensions -- to be sure that shaft and bore diameters match those specified for the seal
selected.
2. Check seal -- for damage that may have occurred prior to installation. A sealing lip that is turned
back, cut or otherwise damaged should be replaced.
3. Check bore -- to see that the leading edge is deburred. A rounded corner of chamfer should be
provided.
