27
105643 01/10
Operating Instruction
Table of Contents
Rub the appliance dry after cleaning.
Checking the charger
Remove the voltage from the appliance; to
do this, pull the mains plug and the charg-
ing cable.
Check the cables for damage and wear.
Checking the rollers
All rollers must turn easily.
Check the braking function on the steering
rollers.
Check that all screws on the rollers are
tight.
Checking the emergency off
Function test
Grease the lifting spindle and the
guides
1
1
2
Fig. 13:
Separate the appliance from the electrical
mains before the start.
Open the cover and pull the battery plug.
Press the emergency off switch.
Release screws (1) and push the cover rail
(2) upwards.
Dismantle the spindle cover.
Grease the spindle and guide tracks on the
inside of the pillar slightly.
Assemble the spindle cover.
Place the covering track (2) from above
and tighten screw (1).
Replace the upper connecting screw and
then the lower connecting screw while the
appliance is standing.
Greasing load support rollers
•
All rollers must run easily.
Replacing the battery
1
2
Fig. 14:
Open the cover by releasing the screws (1)
Pull the cable plug
Remove batteries (2)
Replace new batteries
Replace the plug, do not confuse the con-
nections
Close the cover once more by tightening
the screws (1).
Dispose of old batteries properly.
GB
Содержание BlitzRotary Chief MW80
Страница 92: ......