Dover Blackmer TYPHON 1000 Скачать руководство пользователя | Manualshive

Страница: 16 / 21

background image

4.8 Fan and thermocontact connectors

replacement

If needed, to give ease, remove the cooler cover.

For the thermocontact connector replacement :

• Unplug the connector from the thermocontact.

• Remove the old connector and contacts.

• Connect the 2 new contacts with appropriated tool.

• Insert cable into the black protection before thermocon-

tact connector.

• Heat the black protection, starting from connector side.

• Spray some oily liquid on both connections sides

(thermocontact and thermocontact connector).

For the fan connector replacement :

• Unplug the connector from the fan side.

• Remove the old connector and contacts.

• Connect the 2 new contacts with appropriated tool.

• Insert contacts the white connector.

• Insert cable into the black protection.

• Spray some oily liquid on both connections sides (Fan

and relay side).

• Heat the black protection, starting from middle.

Thermocontact

connector

Thermocontact

Fan connector

Fan

16/21

NT 1401-F00 12.05 Cold front outlet Intercooler TYPHON e

44.. M

MA

AIIN

NT

TE

EN

NA

AN

NC

CE

E ((ccoonnttiinnuuoouuss))

«
...
14
15
16
17
18
...
»

Содержание Blackmer TYPHON 1000






















Отзывы:

Нет отзывов

Похожие инструкции для Blackmer TYPHON 1000

Бренд: Streetwize Страницы: 2

Бренд: Gardner Denver Страницы: 87

Бренд: KAESER KOMPRESSOREN Страницы: 304

VDC 400/100 CM3

Бренд: Fubag Страницы: 15

Бренд: Campbell Hausfeld Страницы: 36

Бренд: pro.point Страницы: 40

Бренд: SM ProAudio Страницы: 12

Бренд: Fini Страницы: 40

Бренд: YATO Страницы: 45

Бренд: Gardner Denver Страницы: 70

Бренд: Quincy Страницы: 36

Turbocor Twin-Turbine TTS Series

Бренд: Danfoss Страницы: 114

Бренд: Campbell Hausfeld Страницы: 24

Бренд: Craftsman Страницы: 28

Бренд: Campbell Hausfeld Страницы: 36

Бренд: Sanden Страницы: 16

Бренд: ZIPPER MASCHINEN Страницы: 26

Бренд: ZIPPER MASCHINEN Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды