Model No. :______________________________________
DMX Serial No. :__________________________________
Pump Serial No. :_________________________________
ACP Serial No. :__________________________________
FD Serial No.:_________________________________ ___
Conversion kit Serial No. :_________________________
Date of Installation :______________________________
It is Blackmer's field experience that when a truck is
designed for dual use, utilizing a 3" TXD3 Pump, the( ACP )
Air Control Panel regulator s should be set at 100 PSI on the
Hi Pressure Regulator and 50 to 55 PSI on the Low
Regulator. This will allow the pump to overcome back
pressure created utilizing 1 1/4" or 13/8" hose and nozzle.
Pump Operating Pressure :________________________
Flow Detection Flowrate :__________________________
Low Pressure ACP Setting :________________________
High Pressure ACP Setting :_______________________
Maximum Flowrate full hose :______________________
Maximum Flowrate empty hose :____________________
4/15
NT 201B-A00 04.06 DMX IV Air elimination system e
3. DMX DATA
4. SYSTEM CONSIDERATIONS
NOTICE :
THE BLACKMER DMX III AIR ELIMINATION SYSTEM MUST ONLY BE
INSTALLED IN SYSTEMS DESIGNED BY QUALIFIED ENGINEERING
PERSONNEL. SYSTEM DESIGN MUST CONFORM WITH TO ALLAPPLI-
CABLE REGULATIONS AND CODES AND PROVIDE WARNING OF ALL
SYSTEM HAZARDS.
NOTICE :
THE ENCLOSED IOM APPLY TO DMX III WHERE THEUPGRADE KIT
HAVE BEEN INSTALLED. SEE ENCLOSE AVIEW OF THE UPGRADE KIT.
The Blackmer DMX IV Air Elimination System is designed for air-
free delivery of metered fuels. The system includes the follo-
wing : Blackmer DMX IV Air Eliminator, Blackmer Air Control
Panel, Blackmer Pneumatic Flow Detector/Check Valve and
Blackmer TXD series pump with a DMX pneumatic type relief
valve.
Meters are not supplied by Blackmer.
NOTICE :
REFER TO THE METER MANUFACTURER'S RECOMMENDATIONS
REGARDING INSTALLATION AND USE. IN PARTICULAR ASSURE
COMPATIBILITY WITH THE FLOWRATE AND PRESSURE CHARACTE-
RISTICS OF THE DMX IV AIR ELIMINATION SYSTEMS.
FAILURE TO DISCONNECT AND LOCKOUT
ELECTRICAL POWER OR ENGINE DRIVE
BEFORE ATTEMPTING MAINTENANCE
CAN CAUSE SEVERE PERSONAL INJURY
OR DEATH.
WARNING
Hazardous
machinery
can cause serious
personal injury.
FAILURE TO SET THE VEHICLE EMER-
GENCY BRAKE AND CHOCK WHEELS
BEFORE PERFORMING SERVICE CAN
CAUSE SEVERE PERSONAL INJURY OR
PROPERTY DAMAGE.
WARNING
Hazardous machinery
can cause severe
personal injury
or property damage.
