background image

3/15

NT 201B-A00 04.06 DMX IV Air elimination system e

1. SAFETY DATA

2. REQUIRED MANUALS

NOTICE :

REVIEW AND FOLLOW ALL HAZARD WARNINGS PROVIDED IN THE
APPROPRIATE BLACKMER PUMP INSTALLATION, OPERATION
AND MAINTENANCE INSTRUCTION MANUAL.

REFER TO THE APPROPRIATE COMPONENT IOM TO OBTAIN TECH-
NICAL DATA (MAXIMUM FLOWRATE, PRESSURE…) AND INITIAL
START UP INFORMATION.

PRODUCT / 

MODEL 

PARTS LIST 

INSTRUCTION 

MANUAL 

DMX IV system   Not applicable  

201B-A00 

TXD 2 

201-A02 

TXD 2.5 

201-A03 

TXD 3 

201-A04 

201-A00 

DMX IV unit  

201B-A01 

201B-C00 

FLOW 
DETECTOR 

201B-D00 (330 e-II) 

Air Control 
Panel 

201B-E00 

DMX 
conversion kit 

201B-B00 

DMX expansion 
tank 

201B-F00 

NOTE :

Blackmer pump manuals & parts lists may be obtained from
Blackmer's website (www.blackmer.com) or by contacting
Blackmer Customer Service.

NOTICE :

AS THE COMPONENT OF THE DMX SYSTEM MAY FUNCTIONNA-
LY LEAK AIR TO THE ATMOSPHERE, A PRESET, SPRING LOA-
DED AIR CHECK VALVE MUST BE INSTALLED IN THE LINE SUP-
PLYING AIR TO THE DMX SYSTEM (ACP, DMX, ...) TO ENSURE
MINIMUM SAFE AIR PRESSURE FOR THE BRAKE SYSTEM.

IF PUMPING HAZARDOUS OR TOXIC
FLUIDS, THE SYSTEM MUST BE FLUSHED
AND DECONTAMINATED, INSIDE AND OUT,
PRIOR TO PERFORMING ANY SERVICE
OPERATION.

WARNING

Hazardous or toxic

fluids can cause

serious injury.

FAILURE TO RELIEVE SYSTEM PRESSU-
RE PRIOR TO PERFORMING PUMP SERVI-
CE OR MAINTENANCE CAN CAUSE PER-
SONAL INJURY OR PROPERTY DAMAGE.

WARNING

Hazardous pressure 

can cause 

personal injury 

or property damage.

ALL FLUIDS PUMPED MUST BE COMPATI-
BLE WITH DMX MATERIAL. INCOMPATIBI-
LITY CAN CAUSE FIRE, SERIOUS PERSO-
NAL INJURY OR PROPERTY DAMAGE.

WARNING

Hazardous fluids 

can cause fire,

serious personal 

injury or property

damage.

DISCONNECTING THE FLUID OR PRESSURE
CONTAINMENT COMPONENTS DURING
PUMP OPERATION CAN CAUSE SERIOUS
PERSONAL INJURY, DEATH OR MAJOR
PROPERTY DAMAGE.

WARNING

Hazardous pressure 

can cause 

personal injury 

or property damage.

FAILURE TO SET THE VEHICLE EMERGENCY
BRAKE AND CHOCK WHEELS BEFORE
PERFORMING SERVICE CAN CAUSE
SEVERE PERSONALINJURYOR PROPERTY
DAMAGE.

WARNING

Hazardous machinery 

can cause severe

personal injury 

or property damage.

FAILURE TO DISCONNECT AND LOCKOUT
ELECTRICAL POWER OR ENGINE DRIVE
BEFORE ATTEMPTING MAINTENANCE
CAN CAUSE SEVERE PERSONAL INJURY
OR DEATH.

WARNING

Hazardous 

machinery 

can cause serious

personal injury.

WHEN THE DMX VENTING OUTLET IS
NOT CONNECTED TO A VAPOR RECO-
VERY SUPPLY, THE VAPOR VENTED
MAY CREATE A POTENTIALLY EXPLO-
SIVE ATMOSPHERE. MAKE SURE SUR-
FACE TEMPERATURE AND IGNITION
SOURCES ARE ADAPTED TO THE
POTENTIALLY

EXPLOSIVE ATMO-

SPHERE THEY MAY CREATE.

WARNING

Ignition of potentially 

explosive atmosphere 

can cause personal injury

or property damage.

Содержание Blackmer DMX IV
















Отзывы: