Model 401 & 403 Pass-Thru
Service and Installation Instructions
99-21972-S001 Rev. C
- 39 -
1
3.
For replacement tag molding, specify width of shelf when ordering, or specify
door width.
Frame Single Station Socket Replacement
1.
Start at top back of frame.
2.
Remove raceway cover. Insert flat-head screwdriver under back edge of retainer
to remove.
3.
To remove raceway clip, insert flat-haed screwdriver under top edge of clip.
4.
To re-install clip, insert curved end of clip into groove in bottom of raceway, then
snap clip over raceway cover.
5.
Once raceway cover is removed, single station socket is exposed.
6.
Insert flat-head screwdriver into screws and remove.
7.
Pull frame female socket out through back of frame.
