Model 401 & 403 Pass-Thru
Service and Installation Instructions
99-21972-S001 Rev. C
- 45 -
1
401 LED Lighting Installation Instructions
Tools Required
#2 Phillips Head Screwdriver
Rubber or plastic mallet
Cordless drill w/attachments
Flat-head screwdriver
Needle-nose pliers
Wire stripper and cutter
1/8” drill bit
3/8” drill bit
Tips
• Complete replacement of wire assemblies is recommended whenever
required. Splice wires only if necessary, using proper materials such as
electrical tape, wire nuts, flux core solder and heat shrink.
• Apply liquid soap to rail plastic covers and gaskets upon installation, to
facilitate insertion into mounting grooves.
• Keep doors and frames clean for product efficiency. This can also help reduce
energy consumption and potential health hazards.
• Whenever binding gasket or plastic parts, use food grade silicone.
• Always use the correct tool for the job to be performed. This ensures proper
installation and minimizes safety risks.
401 LED Approved Drivers
Specifications:
401 LED Driver (60-19910-0003)
• Max. Continuous Output Power: 60W
• Input Voltage: 100V – /-10%, 50/60Hz
• Output Current: 0 - 2.5A
• Output Voltage: 24VDC
• Min. Power Factor: >0.9
• IP rating: IP64
• Operating Temperature: -40°C to 60°C max
• Approval/Class: cURus Class 2, Damp Location, FCC Part 15 Class A