7
Dispenser start up
Dispenser start up
1.
Place the machine on a flat horizontal surface that
will support the weight of the machine.
2.
Connect the water inlet hose A to A. And then open
the water tap
3.
Connect the power cord B to B, and insert the
power plug C in the wall socket, the machine will
start automaticlly and fill up and heat the boiler
and cooling down the cooling compartment. Drink
delivery will be blocked until the water in the boiler
has reached the correct temperature.
Note:
The cooling of the product compartment can take
24 hours or more.
Dispenser storage
Please take the following preparations when the machine
is not to be used for a long period, e.g. holidays:
1. Remove the product packs and check the expiry date.
2. Store the product packs in a refrigerator until you
switch the dispenser back on again. When the expiry date
has passed, throw the product packs away.
3. Clean and flush the dispenser.
4. Pull the power plug out of the socket.
5. Close the water tap.
Note:
If the dispenser has been shut down
for longer periods, the date and time
must be set so the programmed cleaning
cycles and eco settings are reactivated.
