17
Cleaning
1. Press
STOP
and then
ENTER
button, hold them
pressed simultaneously for 2-3 seconds to enter the
cleaning mode.
2. The display will show
FLUSHING
,
press
UP
or
DOWN
button until display
shows
CLEANING
, press
ENTER
to continue.
Follow the instruction on the display:
REMOVE PRODUCT PACKS
3. Open the dispenser door.
4. Remove the product packs.
5. When all packs have been removed the display will
automatically continue and show:
CLEAN COOLING BOX PRESS ENTER TO CONFIRM
6. Clean the doser opening with a brush and the interior
of the cooling compartment with a clean, damp cloth.
Dry with a clean paper cloth.
Remove and clean Mixing tray
7. Press
ENTER
and display will show:
REMOVE AND CLEAN MIXING TRAY
8. Follow the steps below:
a. Open the water treatment panel (fig.1.1)
b. Pull the mixing tray straight out (fig.1.2)
Note
:
It is recommended to use the included exchange kit,
which consists of clean mixing tray, to save time.
