29
STRENGTH
In the STRENGTH menu, you can change the drink strenth for all available drinks at once in the range of
+10% to -10%.
1. Select the VOLUME menu by using ↑ or ↓ and press ← to access it.
The following message appears on the display:
Strength
+ 8 %
2. Increase or decrease the drink strength using ↑ and ↓ .
3. Confirm the required value with ← . The new cup volume will be accepted immediately.
Note
:
If you would like to modify the drink strength again, press ←.
DATE/TIME
You can set the date and time in the
DATE/TIME
menu.
The time setting needs to be adjusted at the start and end of daylight saving time.
1. Select the DATE/TIME menu by using ↑ or ↓ and press ← to access it.
The date and time settings are shown on the display. The month setting is flashing.
2. Use ↑ or ↓ to select the correct value.
3. Press ← to got to the next field.
4. Repeat steps 1 and 2 for all fields:
MONTH→ DAY→ YEAR→ HOURS → MINUTES
5. When all fields are set you will see the time.
Note
:
If the dispenser has been shut down for longer periods, the date and time must be set again.
CLEANING DAYS
You can set the weekdays that you want to clean or flush the dispenser in the CLEANING DAYS menu.
Select the
CLEANING DAYS
menu by using ↑ or ↓ and press ← to access it.
There are two submenus:
•
CLEANING
- set "
Cleaning
&
Flushing
" days
•
FLUSHING
- set "
Flushing
" days
Caution
:
It is mandatory to run the "
Cleaning
&
Flushing
" program at least once a week to guarantee food safety.
Determine cleaning days
If you have a Coffee-Coffee version, the dispenser only needs to run the "Cleaning" program once a week.
Default cleaning day is Monday but you can select any day you prefer.
Note
:
You can always set more cleaning and/or flushing days then the minimum required number of days.
