Douwe Egberts Cafitesse 600, Руководство оператора

Страница: 20 / 32

20 02.2010
Operation
Putting into operation
If the dispenser is in standby mode:
1. Open the door of the dispenser.
2. Press the button ON/STANDBY/RESET to activate the dispenser.
The dispenser will re-activate the boiler. Delivery of drinks will remain blocked until the boiler has
reached the correct temperature.
3. Wait until the message „boiler is heaing up, please wait“ has disappeared (10-30 minutes).
4. Flush both hot water and product outlets of the dispenser.
5. Select a drink button to test delivery for each drink.
6. Check color, aroma and taste of the drink.
If the dispenser was switched off:
1. Open the water tap.
2. Plug in the mains plug power cord.
The dispenser will start heating the boiler water and cooling the ingredient storage compartent.
Note:
Subject to the electrical specifications of the dispenser (see „Technical specifications“) and
the ambient temperature, heating the boiler may take 30-120 minutes. Cooling the ingredient
storage may take 24 hours or more.
3. Wait until the dispenser display indicates the ingredient storage has reached the correct
temperature.
4. Insert the ingredient packs.
a. Read the „Best before“ and „Expiry Date“ on the pack.
Do not use packs for which the „Best before“ or „Expiry Date“ has passed.
b. Mark the product placement stickers on the dispenser and insert the packs on the corresponding
position.
5. Clean and flush the dispenser to ensure safe and hygienic operation.
Caution:
If the dispenser has been out of operation for a very long time (for example during the holidays),
repeat the flushing procedure for hot water at least 4 times.
6. Select a drink button to test delivery for each drink.
7. Check color, aroma and taste of the drink.