Douwe Egberts Cafitesse 60, Руководство для заднего офиса

Страница: 53 / 104

Back Office Manual
1.00 2006 Version March H5 − 9 Function (Water System)
5.1.8.6 Boiler
1. Unplug the power cord!
2. Close the water supply or remove the water tank.
3. Remove the drip tray.
4. Empty the boiler:
D Place a suitable container (ca. 3.0 liters / 96,2 fl oz) in front of the
dispenser.
D Pull the drain tube forward.
a.
The boiler can contain very hot water.
D Remove the plug of the drain tube.
D Drain the dispenser completely.
D
Replace the plug.
5. Open the door of the dispenser.
6. Remove the left cover (Fig.26 ).
7. Remove the back cover.
8. Remove the protection plate (USA/CND version only).
Fig. 33 Boiler
b.
c.
Mark one of the temperature sensors and how it is placed (high or low).
9. Carefully remove both NTC’s (fragile) (Fig.31 a.+b.).
10. Disconnect the boil dry connectors (Fig.32 c.).
11. Remove the two retaining bolts at the backside (boiler mounting to the
body).
12. Remove the hot water tube (Fig.33 a.).
13. Remove the spring.
14. Tilt the boiler forward and upwards.
15. Remove the cold water tube (Fig.33 b.) from the boiler.
Fig 34 Water selector
a.
b.
Tube (Fig.33 b.) can contain some (cold) water.
Fig. 34 Water selector
16. Remove the drain tube (Fig.33 c.) from the boiler.
17. Disconnect the connectors from the heating elements.
18. Replace the boiler and assemble in reverse order.
Take care that the thin tube connection (drain) is pointing away from you (Fig.33 c.).
Assemble both NTC’s carefully (fragile), at the correct place.
5.1.8.7 Magnetic valve
1. Unplug the power cord!
2. Close the water supply or remove the water tank.
3. Open the door of the dispenser.
4. Remove the left cover (Fig.26 ) and the back cover (fixed water connection).
5. Disconnect both connectors from the magnetic valve.
6. Remove the protection plate on the back side (USA/CND version only).
7. Replace the magnetic valve and assemble in reverse order.