6
Attaching the Foot Filter and Priming Tubing
Grab the Clear
flexible PVC Tube
included with your pump.
Cut the
Tube
in half,
one piece for the Priming
Valve and the other one
for the Suction Valve.
Attach the end of one of
the sections to the
Suction Valve and the
other end to the Foot
Filter, following
procedure in Step 16.
Make sure the Foot
Filter sits comfortably
in the chemical container.
Slide the second
section of the
Clear Flexible
PVC Tube onto
the Priming Barb.
Place the other
end of the tube
inside the
chemical container.
Next, connect
the pump to the
Water Meter
(see steps
28 - 33 below).
CONNECTING THE WATER METER - You will need a punch and a small flat head screwdriver
To connect the pump to
the
Water Meter
, remove
the bottom front cover
from the pump, using a
flat head screwdriver.
Remove the rubber
cap on the left.
Using a punch tool,
punch a small hole
through the rubber
cap.
Insert the
Water Meter
wires through the hole
in the rubber cap.
Run the wires back
through the hole in the
front cover and reinsert
the rubber cap.
Insert the wires into
terminals 3 and 4 from left
(push the buttons to insert).
Make sure they are
connected properly
and secured.
24
25
26
27
28
29
Tubing Connection - Water Meter Wiring
30
31
32
33
