5.3 Mount the paneling
1.
Attach the end caps.
2.
Break off the marked gaps on the panelings. Pay
attention that the correct side is broken off.
3.
Mount the paneling of the glide rail.
4.
Measure the dimension X.
5.
Shorten the middle paneling to the dimension
X‑30 mm.
6.
Mount the middle paneling.
7.
Attach the plastic shades.
5.4 Check the EMF
Only for GSR‑EMF XEA
The EMF can be released manually or by cutting of the
power supply.
5.4.1 Release EMF manually
1.
Open the door leaf and lock it.
2.
Pull on the locked door leaves.
‣ The door leaves are released and close. The
active leaf closes only when the fixed leaf is
closed.
5.4.2 Delete EMF electronically
1.
Open the door leaf and lock it.
2.
Cut off power supply (i.e. operation of the manual
release button, alarm release of the RMZ etc.).
‣ The door leaves are released and close. The
active leaf closes only when the fixed leaf is
closed.
6 Operating
Only for GSR‑EMF XEA
6.1 Open and lock door
1.
Open door leaves to the fixture point.
‣ The door leaves remain standing after letting
go.
6.2 Close door
1.
Firstly, press shut the fixed leaf, then the active
leaf against the resistance or press the optional
manual release button.
‣ The door leaves are released and close. The
active leaf closes only when the fixed leaf is
closed.
7 Dismounting,
recycling and
disposal
Dismantling is the same procedure in reverse and
must be carried out by qualified personnel.
The product must be disposed of environmentally
sound. Electro‑technical parts and batteries must not
be disposed of as household waste. Dispose of
electro‑technical parts and batteries in the arranged
acceptance and collection points.
6
GSR XEA BG/GSR-EMF XEA BG
2017-10
dormakaba Mounting instructions
WN 059385 45532
Operating
