32
PUMA 480LM
P48LMISE98
4) By rotating the spindle manually or rotating the C axis after converting three axes with
each other in Handle mode, measure the concentricity on spindle and ID holder.
5) Move the X axis in Handle mode to set the gauge to 0 and check the height error.
※
Since the error is the height error of the turret, make correction of the adjusting plate
according to the error.
6) Return to the reference point and enter half of the X-axis error (step 5 above) in
"Parameter No.1850 Grid Shift".
7) When the alarm message of "P/S Alarm 000 Please Turn Off Power” is displayed, turn
off the machine and turn it back on in a moment.
8) Return the X axis to the reference point manually.
9) Repeat steps 2) through 5) above until you get a satisfactory result.
