24
PUMA 480LM
P48LMISE98
9. Precision Measurement & Correction
When the machine leveling is completed, perform the precision inspection on the machine in
order to deal with the precision changes that may occur while in transportation or installation.
This is performed to produce the optimal precision for the machine.
9.1 Runout on the spindle & nose
Before attaching the chuck to the spindle, ensure that no scratch occurs on the spindle or
the nose.
1) Precision work
Install the level on a solid component such as
bed or turret, and measure on the spindle or
nose.
Tolerance: below 0.01 mm
▶
2) Correct
As the final accuracy is determined based on
the chuck being attached, you just take a note
of measurements at this moment.
