Doosan AD158TI, Руководство по эксплуатации и техническому обслуживанию

Страница: 69 / 294

Main accessory parts - 63 -
5.4.3. Starter motor
The starter motor is installed on the flywheel
housing.
When the starting key switch is turned on, the
starter motor pinion flies out and engages the
ring gear of the flywheel. Then the main con-
tact is closed, current flows, and the engine is
started.
After the engine starts, the pinion automatically
returns to its initial position when the starting
key switch is released. Once the engine starts,
the starting key switch should be released
immediately.
Otherwise, the starter motor may be damaged
or burned out. In case of repairing the engine,
dip the pinion of the starter and ring gear into
the fuel and remove the corrosion with brush.
After that apply the grease on them to protect
the corrosion.
Whenever you clean the starter, always pay
attention not to occur the electric short due to
entering the water etc.
Starter motor always should be prevented from humid.
Precaution
Before working the electric system of the engine be sure to detach the battery wire (-) to
prevent from electric short.
M
Circuit diagram
50 30
31
EB2M6002
EB2M6001